LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Lighting (Interior)) >> Luggage Compartment Room Light >> Inspection

Luggage Compartment Room Light: Inspection

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT NO. 2 ROOM LIGHT ASSEMBLY 
    1. Apply battery voltage to the No. 2 room light assembly connector
    2. Check that the light comes on.

      OK 

      SPECIFIED CONDITION CHART

      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 1
      Battery negative (-) → Terminal 2      		 Light comes on

      If the result is not as specified, replace the No 2 room light assembly.

      Fig 1: Identifying No 2 Room Light Assembly Connector Terminals
      G05754646Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals