Front Door Courtesy Switch: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL FRONT DOOR COURTESY SWITCH ASSEMBLY
1. Connect the connector
2. Using "TORX" socket wrench T-type T30, install the front door courtesy switch assembly with the "TORX" bolt.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
  
  Fig 1: Identifying TORX Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002