FOOTWELL Light: Inspection

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT FOOTWELL LIGHT
1. Connect a positive (+) lead from the battery to terminal 2 and a negative (-) lead to terminal 1.
2. Check that the footwell light comes on
  OK: Comes on
  
  If the result is not as specified, replace the footwell light.
  
  Fig 1: Identifying Footwell Light Connector Terminals
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002