Door Courtesy Light: Inspection

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT DOOR COURTESY LIGHT ASSEMBLY
1. Connect a positive (+) lead from the battery to terminal 2 and a negative (-) lead to terminal 1.
2. Check that the door courtesy light comes on.
  OK: Comes on
  
  If the result is not as specified, replace the bulb or door courtesy light assembly.
  
  Fig 1: Identifying Door Courtesy Light Assembly Connector Terminals
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002