LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Pre-Collision) >> Pre-Collision System >> DTC B2057 Yaw Rate Sensor >> Description

DTC B2057 Yaw Rate Sensor: Description

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

This DTC is output when a malfunction in the yaw rate and acceleration sensor is detected. This circuit consists of the yaw rate and acceleration sensor and seat belt control ECU. Signals are sent from the yaw rate and acceleration sensor using CAN communication

DTC DETECTION CONDITION AND TROUBLE AREA

DTC No DTC Detection Condition Trouble Area
B2057
  • Malfunction in yaw rate and acceleration sensor
  • CAN communication system
  • Yaw rate and acceleration sensor
  • Seat belt control ECU