System Description
WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
The memory system can store the driver seat, front passenger seat, outside rear view mirror positions and tilt & telescopic position Up to 3 memory positions can be stored in the system memory and recalled. Three positions can be saved for the driver memory switch or front passenger memory switch
- Each seat ECU stores the seat position (seat slide, front vertical, rear vertical and reclining) in its memory. Each seat ECU is built into the power seat switch.
- Each mirror ECU stores the outside rear view mirror position in its memory.
- The tilt & telescopic ECU stores the tilt & telescopic position in its memory.
- The seat ECU (Driver) outputs a reproduction signal to each ECU