LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Mirror (Exterior)) >> Power Mirror Control System >> Diagnosis System

Diagnosis System

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. DESCRIPTION 
    1. Data of the system can be read from the Data Link Connector 3 (DLC3) of the vehicle. Therefore, when the system seems to be malfunctioning, use the Techstream to check for a malfunction and repair it
  2. CHECK DLC3 
    1. Check the DLC3 (See HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS )
  3. INSPECT BATTERY VOLTAGE 

    Standard voltage: 11 to 14 V 

    If the voltage is below 11 V, recharge or replace the battery before proceeding.