LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Mirror (Exterior)) >> Outer Mirror Control Ecu >> Installation

Outer Mirror Control Ecu: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL OUTER MIRROR CONTROL ECU ASSEMBLY 
    1. Install the outer mirror control ECU assembly with the 2 screws.
    2. Connect each connector.
  2. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP  (See REASSEMBLY )
  3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY  (See REASSEMBLY )
    Fig 1: Identifying Outer Mirror Control ECU Assembly And Screws
    G05756222Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL COURTESY LIGHT ASSEMBLY  (See REASSEMBLY )
  5. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL  (See REASSEMBLY )
  6. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG  (See REASSEMBLY )
  7. INITIALIZE POWER WINDOW CONTROL SYSTEM 

    (See INITIALIZATION )