LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Seat Belt) >> Front Seat Inner Belt Assembly >> Removal

Front Seat Inner Belt Assembly: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT SEAT HEADREST ASSEMBLY 
  2. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER  (See REMOVAL )
  3. REMOVE FRONT INNER SEAT TRACK BRACKET COVER (See  REMOVAL  ) 
  4. REMOVE REAR OUTER SEAT TRACK COVER  (See REMOVAL )
  5. REMOVE REAR INNER SEAT TRACK COVER  (See REMOVAL )
  6. REMOVE FRONT SEAT ASSEMBLY  (See REMOVAL )
  7. REMOVE FRONT SEAT INNER BELT ASSEMBLY 
    1. for Driver Seat
      1. Disconnect the connector and disengage the 3 clamps.
    2. for Passenger Seat:
      1. Disconnect the connector and disengage the 4 clamps.
        Fig 1: Locating Front Seat Inner Belt Assembly Connector And Clamps
        G05755125Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the nut and front seat inner belt assembly
      Fig 2: Identifying Nut And Front Seat Inner Belt Assembly
      G05320152Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals