Inspection Procedure

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

CHECK VEHICLE SIGNAL (DISPLAY CHECK MODE)

Enter the "Display Check" mode (Vehicle Signal Check Mode) (See OPERATION CHECK )

Check that the display changes between ON and OFF according to the light control switch operation

LIGHT CONTROL SWITCH REFERENCE

Light Control Switch	Display
TAIL or ON	ON
OFF	OFF

Fig 1: Diagnosis Display - Vehicle Signal Check Mode

HINT

This display is updated once per second As a result, it is normal for the display to lag behind the actual change in the switch

NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )

OK: REPLACE MULTI-DISPLAY (See REMOVAL )