LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Navigation) >> Navigation System >> DTC 58-45 High Temperature; DTC 80-45 High Temperature >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

HINT

After the inspection is completed, clear the DTCs

  1. CHECK NAVIGATION ECU 
    1. Park the vehicle in a cool place
    2. Check that the temperature of the navigation ECU has become sufficiently low, then start the engine to verify the malfunction symptom

      OK: Same problem does not occur. 

    NG: REPLACE NAVIGATION ECU  (See REMOVAL  )

    OK: END