LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Tire Pressure Warning System) >> Tire Pressure Warning Valve >> Disposal

Tire Pressure Warning Valve: Disposal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

HINT

The tire pressure warning valve and transmitter is powered by a lithium battery When disposing of the tire pressure warning valve and transmitter, remove the battery and dispose of it correctly

  1. DISPOSE OF TIRE PRESSURE WARNING VALVE AND TRANSMITTER 
    1. Using a screwdriver, pry off the back cover.
      Fig 1: Prying Off Back Cover
      G05417622Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Cut the 2 terminals that connect the battery to the base board to remove the battery

      HINT.

      The battery and base board are covered with silicone.

      Fig 2: Identifying Lithium Battery And Terminal
      G05417623Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002