High Pitched Horn: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL HIGH PITCHED HORN ASSEMBLY
1. Install the high pitched horn assembly with the bolt.
  Torque: 19 N*m (194 kgf*cm, 14 ft.*lbf)
2. Connect the connector
INSTALL COOL AIR INTAKE DUCT SEAL (See INSTALLATION )

Fig 1: Locating High Pitched Horn Assembly Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002