Wiper Switch: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
1. Engage the claw and install the windshield wiper switch assembly as shown in the illustration.
2. Connect the 2 connectors
  
  Fig 1: Locating Windshield Wiper Switch Assembly Connectors With Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL STEERING COLUMN COVER
1. Engage the 3 claws and the 4 clips.
  
  Fig 2: Identifying Upper Steering Column Cover Clips And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the 2 claws and install the screw to the steering column cover
  NOTE: Do not damage the tilt and telescopic switch.
  
  Fig 3: Identifying Lower Steering Column Cover Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Turn the steering wheel assembly to the left and install the screw as shown in the illustration.
  
  Fig 4: Locating Steering Wheel Assembly Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Turn the steering wheel assembly to the right and install the screw as shown in the illustration.
  
  Fig 5: Locating Steering Column Cover Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002