LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Wiper & Washer) >> Wiper And Washer System >> Customize Parameters

Customize Parameters

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

The following items can be customized.

NOTE:
  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.

Wiper 

WIPER REFERENCE CHART

Display Default Contents Setting
Speed Mode AVAIL Function to change to the intermittent operation when the vehicle comes to a stop from driving condition with the wiper switch in the LO position NOT AVL/AVAIL
Auto Wiper AVAIL Function to operate the wiper automatically when it is raining NOT AVL/AVAIL
Re-wiper Control SPD MOD Function to change the time until operating the wiper to prevent dropping after having used the washer SPD MOD /3s/ OFF