Headlight Cleaner Motor: Inspection

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY
HINT:

The following check should be performed with the headlight cleaner motor and pump assembly installed to the washer jar.
1. Fill the washer jar with washer fluid.
2. Connect a positive (+) battery lead to terminal 1 of the headlight cleaner motor and pump, and a negative (-) lead to terminal 2.
3. Check that washer fluid flows from the washer jar.
  OK: Washer fluid is pumped from the washer jar.
  
  If the result is not as specified, replace the headlight cleaner motor and pump assembly.
  
  Fig 1: Connecting Positive Battery Lead To Terminal 1 Of Headlight Cleaner Motor And Pump And Negative Lead To Terminal 2
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002