Front Wiper Rubber: Replacement

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE FRONT WIPER BLADE
1. Remove the holder of the front wiper blade.
2. Remove the front wiper blade from the front wiper arm as shown in the illustration
  NOTE: Do not bend the front wiper arm with the front wiper blade removed, as the arm tip could damage the windshield surface.
  
  Fig 1: Removing Holder Of Front Wiper Blade
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE WIPER RUBBER
1. Remove the front wiper rubber with the wiper rubber backing plates from the front wiper blade.
2. Remove the wiper rubber from the 2 wiper rubber backing plates
  
  Fig 2: Removing Wiper Rubber
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL WIPER RUBBER
1. Install the wiper rubber to the 2 wiper rubber backing plates.
  NOTE:
  - Align the protrusion on the wiper rubber and the concaved portion of the backing plate.
  - Align the curved lines of the backing plate and the glass.
    
    Fig 3: Installing Wiper Rubber To Wiper Rubber Backing Plates
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the wiper rubber to the front wiper blade LH with the top of the rubber (curved end) facing the axis of the wiper arm
  NOTE: Push the wiper rubber into the wiper blade strongly to engage them securely.
  
  Fig 4: Installing Wiper Rubber To Front Wiper Blade LH With Top Of Rubber
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT WIPER BLADE
1. Install the front wiper blade as shown in the illustration.
2. Install the holder of the front wiper blade
  
  Fig 5: Installing Holder Of Front Wiper Blade
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002