LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Wiper & Washer) >> Front Wiper Motor >> On-Vehicle Inspection

On-Vehicle Inspection

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT FRONT WIPER MOTOR 
    1. Operate the front wiper motor.
    2. Stop the front wiper motor operation.
    3. Check the automatic stop position

      OK: The front wipers stop at the positions shown in the illustration. 

      AREA MEASUREMENT CHART

      Area Measurement
      A 15 to 30 mm (0 591 to 1 18 in)
      B Approx 40 mm (1 57 in)
      C 18 5 to 33 5 mm (0 728 to 1 32 in)
      D Approx 20 mm (0 787 in)

      If the result is not as specified, the front wiper motor may have a malfunction

      Fig 1: Identifying Front Wiper Motor
      G05756275Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002