LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Seat) >> Seat Heater Control >> Removal

Seat Heater Control: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT SEAT HEADREST ASSEMBLY 
  2. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER  (See REMOVAL  )
  3. REMOVE FRONT INNER SEAT TRACK BRACKET COVER  (See REMOVAL  )
  4. REMOVE REAR OUTER SEAT TRACK BRACKET COVER  (See REMOVAL  )
  5. REMOVE REAR INNER SEAT TRACK BRACKET COVER  (See REMOVAL  )
  6. REMOVE FRONT SEAT ASSEMBLY  (See REMOVAL  )
  7. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY 
    1. Disconnect the 2 connectors
    2. Disengage the 2 clamps and remove the seat heater control sub-assembly.
    Fig 1: Locating Clamps Of Seat Heater Control Sub-Assembly
    G05754951Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals