LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Seat) >> Power Seat Switch >> Removal

Power Seat Switch: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT SEAT HEADREST ASSEMBLY 
  2. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER  (See REMOVAL  )
  3. REMOVE FRONT INNER SEAT TRACK BRACKET COVER  (See REMOVAL  )
  4. REMOVE REAR OUTER SEAT TRACK BRACKET COVER  (See REMOVAL  )
  5. REMOVE REAR INNER SEAT TRACK BRACKET COVER  (See REMOVAL  )
  6. REMOVE FRONT SEAT ASSEMBLY  (See REMOVAL  )
  7. REMOVE RECLINING POWER SEAT SWITCH KNOB  (See DISASSEMBLY  )
  8. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB  (See DISASSEMBLY  )
  9. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY  (See DISASSEMBLY  )
  10. REMOVE POWER SEAT SWITCH 
    1. Remove the 3 screws
    2. Disconnect the 2 connectors and remove the power seat switch
      Fig 1: Locating Power Seat Switch Connectors
      G05320998Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals