LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Seat) >> Power Seat Switch >> Installation

Power Seat Switch: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL POWER SEAT SWITCH 
    1. Install the power seat switch with the 3 screws
    Fig 1: Locating Power Seat Switch Connectors
    G05320998Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY  (See REASSEMBLY  )
  3. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB  (See REASSEMBLY  )
  4. INSTALL RECLINING POWER SEAT SWITCH KNOB  (See REASSEMBLY  )
  5. INSTALL FRONT SEAT ASSEMBLY  (See INSTALLATION  )
  6. INSTALL REAR INNER SEAT TRACK BRACKET COVER  (See INSTALLATION  )
  7. INSTALL REAR OUTER SEAT TRACK BRACKET COVER  (See INSTALLATION  )
  8. INSTALL FRONT INNER SEAT TRACK BRACKET COVER  (See INSTALLATION  )
  9. INSTALL FRONT OUTER SEAT TRACK BRACKET COVER  (See INSTALLATION  )
  10. INSTALL FRONT SEAT HEADREST ASSEMBLY 
  11. INSPECT SRS WARNING LIGHT 

    HINT.

    Inspect the SRS warning light (See DIAGNOSIS SYSTEM ).

  12. INSPECT FRONT SEAT ASSEMBLY  (See INSTALLATION  )
scientia non olet · About LEMON Manuals