LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Seat) >> Lumbar Switch >> Removal

Lumbar Switch: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT SEAT HEADREST ASSEMBLY 
  2. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER  (See REMOVAL  )
  3. REMOVE FRONT INNER SEAT TRACK BRACKET COVER  (See REMOVAL  )
  4. REMOVE REAR OUTER SEAT TRACK BRACKET COVER  (See REMOVAL  )
  5. REMOVE REAR INNER SEAT TRACK BRACKET COVER  (See REMOVAL  )
  6. REMOVE FRONT SEAT ASSEMBLY  (See REMOVAL  )
  7. REMOVE RECLINING POWER SEAT SWITCH KNOB  (See DISASSEMBLY  )
  8. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB  (See DISASSEMBLY  )
  9. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY  (See DISASSEMBLY  )
  10. REMOVE LUMBAR SWITCH 
    1. Remove the 2 screws and the lumbar switch
      Fig 1: Identifying Lumbar Switch Screws
      G05320994Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals