Front Shock Absorber: Inspection

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT FRONT SHOCK ABSORBER
1. Check that shock absorber oil is not seeping or leaking from the sliding parts of the shock absorber rod.
  
  Fig 1: Identifying Front Shock Absorber
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Compress and extend the front shock absorber rod 4 or more times Check that there is no abnormal resistance or sound.
  If there is any abnormality, replace the front shock absorber with a new one
  
  NOTE: When disposing of the front shock absorber, see Disposal. (See FRONT SHOCK ABSORBER )
  
  Fig 2: Compressing And Extending Front Shock Absorber Rod
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002