LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Front Suspension) >> Front Shock Absorber >> Disposal

Front Shock Absorber: Disposal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISPOSE OF FRONT SHOCK ABSORBER 
    1. Fully extend the front shock absorber rod
    2. Using a drill, make a hole in the cylinder between A and B shown in the illustration to discharge the gas inside.
    Fig 1: Identifying Dispose Area Of Front Shock Absorber
    G05752272Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    CAUTION:
    • Be careful when drilling because shards of metal may fly about, so always use proper safety equipment.
    • The gas is colorless, odorless, and non-poisonous.
scientia non olet · About LEMON Manuals