LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Supplemental Restraint System) >> Center Airbag Sensor Assembly >> On-Vehicle Inspection

On-Vehicle Inspection

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION) 
    1. Perform a diagnostic system check (See DTC CHECK / CLEAR  )
  2. INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED) 
    1. Perform a diagnostic system check (See DTC CHECK / CLEAR  ).
  3. INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED) 
    1. Replace the center airbag sensor assembly.
      CAUTION: Be sure to follow the correct removal and installation procedures of the center airbag sensor assembly.

      HINT:

      The center airbag sensor assembly should be replaced after any of the airbags has deployed, as it has been subjected to an impact.

scientia non olet · About LEMON Manuals