LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Supplemental Restraint System) >> Airbag System >> DTC B1810/53 Short in Driver Side Squib 2nd Step Circuit; DTC B1811/53 Open in Driver Side Squib 2nd Step Circuit; DTC B1812/53 Short to GND in Driver Side Squib 2nd Step Circuit; DTC B1813/53 Short to B+ in Driver Side Squib 2nd Step Circuit >> Description

DTC B1810/53 Short in Driver Side Squib 2nd Step Circuit; DTC B1811/53 Open in Driver Side Squib 2nd Step Circuit; DTC B1812/53 Short to GND in Driver Side Squib 2nd Step Circuit; DTC B1813/53 Short to B+ in Driver Side Squib 2nd Step Circuit: Description

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

The driver side squib 2nd step circuit consists of the center airbag sensor assembly, the spiral cable and the steering pad.

The circuit instructs SRS to deploy when deployment conditions are met.

These DTCs are recorded when a malfunction is detected in the driver side squib 2nd step circuit.

DTC DETECTION CONDITION CHART

DTC No DTC Detection Condition Trouble Area
B1810/53
  • The center airbag sensor assembly receives a line short circuit signal 5 times in the driver side squib 2nd step circuit during primary check
  • Driver side squib 2nd step malfunction
  • Spiral cable malfunction
  • Center airbag sensor assembly malfunction
  • Instrument panel wire
  • Spiral cable
  • Steering pad (Driver side squib 2nd step)
  • Center airbag sensor assembly
B1811/53
  • The center airbag sensor assembly receives an open circuit signal in the driver side squib 2nd step circuit for 2 seconds
  • Driver side squib 2nd step malfunction
  • Spiral cable malfunction
  • Center airbag sensor assembly malfunction
  • Instrument panel wire
  • Spiral cable
  • Steering pad (Driver side squib 2nd step)
  • Center airbag sensor assembly
B1812/53
  • The center airbag sensor assembly receives a short circuit to ground signal in the driver side squib 2nd step circuit for 0 5 seconds
  • Driver side squib 2nd step malfunction
  • Spiral cable malfunction
  • Center airbag sensor assembly malfunction
  • Instrument panel wire
  • Spiral cable
  • Steering pad (Driver side squib 2nd step)
  • Center airbag sensor assembly
B1813/53
  • The center airbag sensor assembly receives a short circuit to B+ signal in the driver side squib 2nd step circuit for 0 5 seconds
  • Driver side squib 2nd step malfunction
  • Spiral cable malfunction
  • Center airbag sensor assembly malfunction
  • Instrument panel wire
  • Spiral cable
  • Steering pad (Driver side squib 2nd step)
  • Center airbag sensor assembly