LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Power Assist Systems) >> Power Steering System >> DTC C1541: Vehicle Speed Signal Malfunction >> Description

DTC C1541: Vehicle Speed Signal Malfunction: Description

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

The power steering ECU assembly receives vehicle speed signals from the skid control ECU via CAN communication The ECU provides appropriate assisting force in accordance with the vehicle speed, based on the signals

If the ECU detects this DTC, it adjusts the amount of power assistance for a speed of 100 km/h (62 mph) and continues the system control

DTC DETECTION CONDITION CHART

DTC No DTC Detection Condition Trouble Area
C1541 This DTC is detected when vehicle speed signals via CAN communication are cut off for 3 seconds or more
  • Speed sensor circuit
  • Skid control ECU
  • CAN communication system
  • Power steering ECU assembly