LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Heating / Air Conditioning System) >> Smog Ventilation Sensor >> Installation

Smog Ventilation Sensor: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL SMOG VENTILATION SENSOR 
    1. Install the smog ventilation sensor with the bolt.

      Torque: 9.8 N*m (100 kgf*cm, 87 in.*lbf) 

    2. Connect the connector
      3. Fig 1: Locating Smog Ventilation Sensor Bolts
      G05755473Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL COOL AIR INTAKE DUCT SEAL  (See INSTALLATION )
scientia non olet · About LEMON Manuals