Fuel Pump Resistor: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE COOL AIR INTAKE DUCT SEAL (See REMOVAL )
REMOVE ENGINE ROOM SIDE COVER RH (See REMOVAL )
REMOVE FUEL PUMP RESISTOR
1. Disconnect the connector and clamp from the fuel pump resistor.
2. Remove the bolt and disconnect the engine wire
  
  Fig 1: Locating Connector And Engine Wire Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the bolt and fuel pump resistor.
Fig 2: Locating Fuel Pump Resistor Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002