DTC B2285: Steering Lock Position Signal Circuit Malfunction: Description
WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
This DTC is output when serial communication signals and LIN communication signals in the circuit between the power source control ECU and steering lock actuator (steering lock ECU) are inconsistent
HINT.
When the power source control ECU is replaced with a new one and the negative (-) battery terminal is connected, the power source mode becomes the IG-ON mode When the battery is removed and reinstalled, the power source mode that was selected when the battery was removed is restored
DTC DETECTION CONDITION CHART
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B2285 | Cable and LIN information between the power source control ECU and the steering lock ECU are inconsistent |
|