DTC B2282: Vehicle Speed Signal Malfunction: Description
WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
The power source control ECU and the combination meter are connected by a cable and the BEAN DTC B2282 is output when 1) the cable information and BEAN information are inconsistent, and 2) a malfunction is detected between the vehicle speed sensor and combination meter
HINT
When the power source control ECU is replaced with a new one and the negative (-) battery terminal is connected, the power source mode becomes the IG-ON mode When the battery is removed and reinstalled, the power source mode that was selected when the battery was removed is restored
DTC DETECTION CONDITION CHART
| DTC No | DTC Detection Condition | Trouble Area |
|---|---|---|
| B2282 | When both conditions below are met
|
|