LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Theft Deterrent / Keyless Entry) >> Engine Immobilizer System >> DTC Check / Clear

DTC Check / Clear

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG)
    3. Turn the Techstream on.
    4. Enter the following menus Body Electrical or Powertrain / Smart Access or Engine / Trouble Codes
    5. Check the details of the DTC (s) (See DIAGNOSTIC TROUBLE CODE CHART  ).
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on
    4. Enter the following menus: Body Electrical or Powertrain / Smart Access or Engine / Trouble Codes
    5. Clear the DTCs