Engine Hood Courtesy Switch: Inspection
WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT ENGINE HOOD COURTESY SWITCH
- Measure the resistance according to the value (s) in the table below
Standard Resistance
RESISTANCE REFERENCE
| Tester Connection |
Switch Position |
Specified Condition |
| 1-2 |
Free (OFF) |
10 kΩ or higher |
| 1-2 |
Pushed (ON) |
Below 1 Ω |
If the result is not as specified, replace the hood lock assembly
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002