LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Theft Deterrent / Keyless Entry) >> Certification Ecu >> Removal

Certification Ecu: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM COVER 
  2. REMOVE DECK SIDE TRIM BOX LH 
  3. REMOVE DECK SIDE TRIM BOX RH 
  4. REMOVE ROPE HOOK ASSEMBLY  (See REMOVAL )
  5. REMOVE REAR LUGGAGE COMPARTMENT TRIM COVER  (See REMOVAL )
  6. REMOVE NO. 2 ROOM LIGHT ASSEMBLY  (See REMOVAL )
  7. REMOVE ROPE HOOK  (See REMOVAL )
  8. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM HOOK  (See REMOVAL )
  9. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER  (See REMOVAL )
  10. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK  (See REMOVAL )
  11. REMOVE SIDE LUGGAGE COMPARTMENT TRIM COVER  (See REMOVAL )
  12. REMOVE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) 
    1. Disconnect the connector
    2. Remove the 2 nuts and the certification ECU (smart key ECU assembly).
      Fig 1: Identifying Certification ECU And Nuts
      G05754589Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals