LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Theft Deterrent / Keyless Entry) >> Certification Ecu >> Installation

Certification Ecu: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) 
    1. Install the certification ECU (smart key ECU assembly) with the 2 nuts.
    2. Connect the connector.
    Fig 1: Identifying Certification ECU And Nuts
    G05754590Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL SIDE LUGGAGE COMPARTMENT TRIM COVER  (See INSTALLATION )
  3. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK  (See INSTALLATION )
  4. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER  (See INSTALLATION )
  5. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM HOOK  (See INSTALLATION )
  6. INSTALL ROPE HOOK  (See INSTALLATION )
  7. INSTALL NO. 2 ROOM LIGHT ASSEMBLY  (See INSTALLATION )
  8. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER  (See INSTALLATION )
  9. INSTALL ROPE HOOK ASSEMBLY  (See INSTALLATION )
  10. INSTALL DECK SIDE TRIM BOX RH 
  11. INSTALL DECK SIDE TRIM BOX LH 
  12. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM COVER 
  13. REGISTER ECU COMMUNICATION ID 
    NOTE: When replacing the certification ECU (smart key ECU assembly), perform initialization (See REGISTRATION  ).
  14. REGISTER KEY 
    NOTE: When replacing the certification ECU (smart key ECU assembly), perform initialization (See REGISTRATION  ).
scientia non olet · About LEMON Manuals