LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Automatic Transaxle) >> Park / Neutral Position Switch >> Adjustment

Park / Neutral Position Switch: Adjustment

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY 
    1. Loosen the bolt of the park/neutral position switch and move the shift lever to N
    2. Align the groove with the neutral basic line
    3. Hold the switch in position and tighten the bolt

      Torque: 13 N*m (130 kgf*cm, 9 ft.*lbf) 

    4. After adjustment, perform the on-vehicle inspection (See REMOVAL  )
      Fig 1: Aligning Groove With Neutral Basic Line
      G04948462Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals