LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Automatic Transaxle) >> Automatic Transmission System >> DTC U0100: Lost Communication with ECM / PCM "A" >> Description

DTC U0100: Lost Communication with ECM / PCM "A": Description

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

The ECM communicates with the TCM using the Controller Area Network (CAN).

If there is a problem in this communication, the TCM sets the DTC

DTC DETECTION CONDITION AND TROUBLE AREA

DTC Code DTC Detection Condition Trouble Area
U0100 Following conditions are met for 1 25 seconds (1 trip detection logic)
  • Engine switch on (IG)
  • Battery voltage is 10 5 V or more
  • No communication between the ECM and TCM
  • Harness and connector
  • ECM
  • TCM