LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Automatic Transaxle) >> Automatic Transmission System >> DTC P2817: Pressure Control Solenoid "H" Performance or Stuck OFF (Shift Solenoid Valve SL5) >> Typical Malfunction Thresholds

Typical Malfunction Thresholds

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

OFF malfunction 

When one of the following conditions is met. OFF malfunction (A), (B), (C), (D) or (E)

OFF malfunction (A) and (D) 

When either condition below is met. Condition (1) or (2)

Condition (1) 

TYPICAL MALFUNCTION THRESHOLDS

Turbine speed / Output speed (NT / NO) 3 9 or more and 8 0 or less (when output speed less than 130 rpm)

Condition (2) 

TYPICAL MALFUNCTION THRESHOLDS

Turbine speed - Output speed (NT - NO) x 1st gear ratio (Actual 1st gear) -50 rpm or more and 50 rpm or less (when output speed 130 rpm or more)

OFF malfunction (B) 

TYPICAL MALFUNCTION THRESHOLDS

Turbine speed - Output speed (NT - NO) x 2nd gear ratio 400 rpm or more

OFF malfunction (C) 

TYPICAL MALFUNCTION THRESHOLDS

Turbine speed - Output speed (NT - NO) x 8th gear ratio 400 rpm or more

OFF malfunction (E) 

TYPICAL MALFUNCTION THRESHOLDS

Shift solenoid valve SLT ON malfunction

ON malfunction 

When either condition below is met: ON malfunction (A) or (B)

ON malfunction (A) 

When either condition below is met: Condition (1) or (2)

Condition (1) 

TYPICAL MALFUNCTION THRESHOLDS

Turbine speed / Output speed (NT / NO) 2 4 or more and 2 9 or less (when output speed less than 200 rpm)

Condition (2) 

TYPICAL MALFUNCTION THRESHOLDS

Turbine speed - Output speed (NT - NO) x 2nd gear ratio (Actual 2nd gear) -50 rpm or more and 50 rpm or less (when output speed 200 rpm or more)

ON malfunction (B) 

When either condition below is met Condition (1) or (2)

Condition (1) 

TYPICAL MALFUNCTION THRESHOLDS

Turbine speed / Output speed (NT / NO) 0 62 or more and 0 75 or less (when output speed less than 1000 rpm)

Condition (2) 

TYPICAL MALFUNCTION THRESHOLDS

Turbine speed - Output speed (NT - NO) x 8th gear ratio (Actual 8th gear) -50 rpm or more and 50 rpm or less (when output speed 1000 rpm or more)