Typical Enabling Conditions
WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
All
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever the following DTCs are not present | None |
| Engine switch | On (IG) |
| Starter | OFF |
Condition (A)
TYPICAL ENABLING CONDITIONS
| Battery voltage | 12 V or more |
Condition (B)
TYPICAL ENABLING CONDITIONS
| Battery voltage | 10 V or more and less than 12 V |
| Target current | Less than 0 75 A |
Condition (C)
TYPICAL ENABLING CONDITIONS
| Battery voltage | 8 V or more |
| Target current | 0 25 A or more |