LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Automatic Transaxle) >> Automatic Transmission System >> DTC P2716: Pressure Control Solenoid "D" Electrical (Shift Solenoid Valve SLT) >> Typical Malfunction Thresholds

Typical Malfunction Thresholds

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

When one of the following conditions is met: Condition (A), (B) or (C)

Condition (A) 

TYPICAL MALFUNCTION THRESHOLDS

When one of following conditions is met Condition (1), (2) or (3)
  • Condition (1) and (2) Output signal duty
 100% or more
  • Condition (3) Output signal
 0% or less

Condition (B) 

TYPICAL MALFUNCTION THRESHOLDS

Output signal No signal

Condition (C) 

TYPICAL MALFUNCTION THRESHOLDS

Difference between commanded voltage and average voltage Little to no difference
scientia non olet · About LEMON Manuals