Typical Enabling Conditions
WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
All
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever the following DTCs are not present | None |
| Battery voltage | 8 V or more |
| Engine switch | On (IG) |
| Starter | OFF |
P0985: Range check (low resistance)
TYPICAL ENABLING CONDITIONS
| Shift solenoid valve SR | ON |
P0986: Range check (high resistance)
TYPICAL ENABLING CONDITIONS
| Shift solenoid valve SR | OFF |