Typical Malfunction Thresholds
When both conditions below are met- OFF malfunction (A) and OFF malfunction (B), (C), (D), (E) or (F)
2 detections are necessary per driving cycle:
1st detection: temporary flag ON
2nd detection. pending fault code ON
OFF malfunction (A)
| Oil pressure switch indication | OFF |
OFF malfunction (B)
When either condition below is met: Condition (1) or (2)
Condition (1)
| Turbine speed / Output speed (NT / NO) | 3 9 or more and 8 0 or less (when output speed less than 130 rpm) |
Condition (2)
| Turbine speed - Output speed (NT - NO) x 1st gear ratio (Actual 1st gear) | -50 rpm or more and 50 rpm or less (when output speed 130 rpm or more) |
OFF malfunction (C)
When either condition below is met. Condition (1) or (2)
Condition (1)
| Turbine speed / Output speed (NT / NO) | 2 4 or more and 2 9 or less (when output speed less than 200 rpm) |
Condition (2)
| Turbine speed - Output speed (NT - NO) x 2nd gear ratio (Actual 2nd gear) | -50 rpm or more and 50 rpm or less (when output speed 200 rpm or more) |
OFF malfunction (D)
When either condition below is met. Condition (1) or (2)
Condition (1)
| Turbine speed / Output speed (NT / NO) | 1 72 or more and 2 07 or less (when output speed less than 400 rpm) |
Condition (2)
| Turbine speed - Output speed (NT - NO) x 3rd gear ratio (Actual 3rd gear) | -50 rpm or more and 50 rpm or less (when output speed 400 rpm or more) |
OFF malfunction (E)
When either condition below is met. Condition (1) or (2)
Condition (1)
| Turbine speed / Output speed (NT / NO) | 1 354 or more and 1 584 or less (when output speed less than 600 rpm) |
Condition (2)
| Turbine speed - Output speed (NT - NO) x 4th gear ratio (Actual 4th gear) | -50 rpm or more and 50 rpm or less (when output speed 600 rpm or more) |
OFF malfunction (F)
When either condition below is met. Condition (1) or (2)
Condition (1)
| Turbine speed / Output speed (NT / NO) | 1 141 or more and 1 291 or less (when output speed less than 600 rpm) |
Condition (2)
| Turbine speed - Output speed (NT - NO) x 5th gear ratio (Actual 5th gear) | -50 rpm or more and 50 rpm or less (when output speed 600 rpm or more) |