LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Automatic Transaxle) >> Automatic Transmission System >> DTC P0748: Pressure Control Solenoid "A" Electrical (Shift Solenoid Valve SL1); DTC P0778: Pressure Control Solenoid "B" Electrical (Shift Solenoid Valve SL2); DTC P0798: Pressure Control Solenoid "C" Electrical (Shift Solenoid Valve SL3); DTC P2810: Pressure Control Solenoid "G" Electrical (Shift Solenoid Valve SL4); DTC P2819: Pressure Control Solenoid "H" Electrical (Shift Solenoid Valve SL5) >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

All 

TYPICAL ENABLING CONDITIONS

The monitor will run whenever the following DTCs are not present None
Engine switch On (IG)
Starter OFF

Condition (A) 

TYPICAL ENABLING CONDITIONS

Battery voltage 12 V or more

Condition (B) 

TYPICAL ENABLING CONDITIONS

Battery voltage 10 V or more and less than 12V
Target current Less than 0 75 A

Condition (C) 

TYPICAL ENABLING CONDITIONS

Battery voltage 8 V or more
Target current 0 25 A or more
scientia non olet · About LEMON Manuals