LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Automatic Transaxle) >> Automatic Transmission System >> DTC P0724: Brake Switch "B" Circuit High >> Monitor Description

Monitor Description

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

This DTC indicates that the stop light switch remains ON When the stop light switch remains ON during GO and STOP driving, the TCM interprets this as a fault in the stop light switch Then the MIL illuminates and the TCM stores the DTC The vehicle must GO (30 km/h (18.63 mph) or more) and STOP (less than 3 km/h (1 86 mph)) 5 times for 2 driving cycles in order for the DTC to be output.

scientia non olet · About LEMON Manuals