LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Lighting (Exterior)) >> Lighting System >> Taillight Circuit >> Description

Taillight Circuit: Description

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

Front lights.

The front controller controls the operation of the FR TAIL relay. The FR TAIL relay turns on the front side marker lights and parking lights.

The front controller receives front side marker and parking light ON request signals from the combination switch ECU through BEAN communication and activates the FR TAIL relay.

The FR TAIL relay is built into the front controller, so unlike conventional relays, it cannot be removed for inspection.

Rear lights:

The main body ECU RH controls the operation of the TAIL relay. The TAIL relay turns on the taillights, license plate lights, and side marker lights

The main body ECU RH receives taillight, license plate light, and side marker light ON request signals from the combination switch ECU through BEAN communication and activates the TAIL relay.

The TAIL relay is built into the cowl side junction block LH, so unlike conventional relays, it cannot be removed for inspection.