License Plate Light Assembly: Inspection

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT LICENSE PLATE LIGHT ASSEMBLY
1. Connect a positive (+) lead from the battery to terminal 1 and a negative (-) lead to terminal 2.
2. Check that the license plate light comes on.
  OK: The light comes on.
  
  If the result is not as specified, replace the license plate light assembly.
  
  Fig 1: Identifying License Plate Light Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002