LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Lighting (Exterior)) >> High Mounted Stop Light Assembly >> Inspection

High Mounted Stop Light Assembly: Inspection

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT CENTER STOP LIGHT SET 
    1. Connect a positive (+) lead from the battery to terminal 2 and a negative (-) lead to terminal 1.
    2. Check that the light comes on

      OK: The light comes on. 

      If the result is not as specified, replace the center stop light set.

scientia non olet · About LEMON Manuals