Height Control Sensor: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
1. Disconnect the connector.
2. Remove the nut.
  
  Fig 1: Locating Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 2 bolts and front height control sensor sub-assembly LH.
  
  Fig 2: Locating Front Height Control Sensor Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
1. Disengage the clamp and disconnect the connector.
  
  Fig 3: Locating Rear Height Control Sensor Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. When reusing the rear height control sensor sub-assembly LH:
  1. Put matchmarks on the rear height control sensor link and bracket.
    
    Fig 4: Identifying Matchmarks On Rear Height Control Sensor Link And Bracket
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 2 bolts, nut and rear height control sensor sub-assembly LH.
  
  Fig 5: Identifying Rear Height Control Sensor Nut And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002