LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 179 (Engine Control System (2GR-FSE) - DTC P050B - P2A03, DTC U0101) >> DTC P2420 Evaporative Emission System Switching Valve Control Circuit High >> Typical Malfunction Thresholds

Typical Malfunction Thresholds

WARNING: This page is about a different car, the 2008 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

"Saturated" indicates that the EVAP pressure change is less than 0.286 kPa (2.14 mmHg) in 60 seconds.

TYPICAL MALFUNCTION THRESHOLDS

EVAP pressure change after EVAP canister vent valve is ON Less than 0.3 kPa (2.25 mmHg)
scientia non olet · About LEMON Manuals