LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 179 (Engine Control System (2GR-FSE) - DTC P050B - P2A03, DTC U0101) >> DTC P2121 Throttle / Pedal Position Sensor / Switch "D" Circuit Range / Performance >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2008 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL ENABLING CONDITIONS

Monitor runs whenever following DTCs are not present None
Either of the following conditions 1 or 2 is met: -
1. Engine switch ON
2. Throttle actuator pedal ON